Craftsman 137.21229 Operator's Manual page 7

UNPACKING YOUR MINTER SAW
IA WARNING n
To avoid injury from unexpected starting or
electrical shock, do not plug the power cord into a
source of power during unpacking and assembly.
This cord must remain unplugged whenever you are
working on the saw.
1. Remove the miter saw from the carton.
iMPORTANT: Do not lift miter saw by the Trigger
Switch handle, it may cause misalignmenL Only lift
machine by the base Hand Hold&
2. Place the saw on a secure stationary work surface.
3. Separate ali parts from the packing material. Check
each one with the illustration to make certain all items
are accounted for, before discarding any packing
material
[A& WARNING]
if any part is missing or damaged, do not attempt
to assemble the miter saw, or plug in the power
cord until the missing or damaged part is correctly
replaced. To avoid etectric shock, use only identical
replacement parts when servicing douNe insulated
tools.
To purchase replacement parts, call
1-800-469-4683.
, For missing or damaged parts upon initiat
purchase, caH 1-800-843-1882.
Machine
Dust Bag
Hold =Down Clamp Blade Wrench
Miter Table Handle