U-Line UONP115SS01B Quick Start Manual page 34

produced. Once the clean cycle begins, it can be canceled
USER GUIDE
by pressing three times. Press
QUICK START GUIDE
making ice. The clean cycle will automatically cancel if user
fails to activate control at steps 2, 3b, and 5b within 2 hours.
Under normal conditions cleaning should be done
Required for cleaning:
when the display shows
• Clean potable water
a cleaning cycle at any time by pressing and
• Bucket and cleaning sponge
holding the clean button for 10 seconds.
• Internal water filter (if applicable) —
appear in the display indicating the start of the
ULANUGGETFILTER**
cleaning process.
• SafeCLEAN Plus™ Cleaner — ULANUGGETCLEAN**
• Hose (7⁄16" ID x 9⁄16" OD) and funnel
◦
CL
You may override in the display without cleaning by
Register your product at u-line.com and receive
pressing and holding the up, down, & light button for 10
a free cleaning kit - ULANUGGETCLEANKIT**
ICE
seconds. will scroll in the display and the cleaning
(cleaner, hose, & funnel)
reminder ( ) will be reset for another approximate six
CL
** available for purchase at u-line.com or your local dealer
month cycle. Failure to clean may reduce the quality
and quantity of ice produced. Once the clean cycle
Need more cleaner? Visit u-line.com
begins, it can be canceled by pressing
Press once more to start making ice. The clean cycle
CAUTION
!
will automatically cancel if user fails to activate control at
steps 2, 3b, and 5b within 2 hours.
Use only SafeCLEAN Plus™ Cleaner. Use of any
other cleaner may damage the finish of the
Required for cleaning:
evaporator and will void the warranty.
• Hose and funnel - provided with unit
• Bucket and cleaning sponge
Follow safety and handling instructions printed on
• Clean potable water
the SafeCLEAN Plus™ bottle.
• SafeCLEAN Plus™ Cleaner
(Part No. ULANUGGETCLEAN) 1-8oz. bottle
Notice:
included with unit
Select models include a water filter. The filter
• 1 Water filter (if required)
must remain in place when using and cleaning
the machine. The filter is designed to filter out
Need more cleaner? Visit u-line.com
scale, sediment, particles and cloudiness as well
as reduce chlorine and other off tastes and odors.
CAUTION
U-Line recommends replacing the filter (Part No.
!
ULANUGGETFILTER) when you clean your machine.
The filter is available at u-line.com. Use only SafeCLEAN Plus™ Cleaner. Use of any
other cleaner may damage the finish of the
evaporator and will void the warranty.
Follow safety and handling instructions printed
on the SafeCLEAN Plus™ bottle.
Cleaning
Notice:
Select models include a water filter. The filter
must remain in place when using and cleaning
the machine. The filter is designed to filter out
scale, sediment, particles and cloudiness as
well as reduce chlorine and other off tastes
and odors. U-Line recommends replacing the
filter (Part No. ULANUGGETFILTER) when you
clean your machine. The filter is available at
u-line.com.
Cleaning
once more to start
CL
. You may initiate
0 1
will
three times.
d. Remove any ice protruding from the ice dispenser
tube.
2. Insert the end of the cleaning tube into the ice
dispenser; slowly pour in approximately 1 quart of
hot (min. 100º F) potable water. This will melt ice
inside the dispenser tube. It is normal for some water
to flow from the ice dispenser tube and exit from the
vent tube while pouring. Omit this step if no ice is in
1. Press and Hold
the ice dispenser tube.
0 1
a. will appear in the display
Cleaning Tube
b. Remove access shield
and Funnel
c. Remove all ice in bin
d. Remove any ice protruding from the ice dispenser
tube.
2. Insert the end of the cleaning tube into the ice
dispenser; slowly pour in approximately 1 quart of
hot (min. 100º F) potable water. This will melt ice
inside the dispenser tube. It is normal for some water
to flow from the ice dispenser tube and exit from the
3. Press and release
vent tube while pouring. Omit this step if no ice is in
a. will appear in the display
02
the ice dispenser tube.
b. Mix 4 ounces of SafeCLEAN Plus™ with 2 quarts of
potable water.
Cleaning Tube
and Funnel
4. Wait until appears in the display
03
a. Using the funnel and cleaning tube, slowly pour
3⁄4 of the cleaning solution into the dispenser
tube. Air and some water will exit the vent tube.
Remove cleaning tube. (Optional - for deeper
cleaning, allow solution to soak for 60 minutes)
b. Press and release
. 04
5 will appear in the display
a. The machine will circulate the solution, cleaning
3. Press and release
and sanitizing the internal components, for
a. will appear in the display
02
approximately 20 minutes.
b. Mix 4 ounces of SafeCLEAN Plus™ with 2 quarts of
b. While the machine is circulating the cleaning
potable water.
solution, use 1⁄2 of the remaining cleaning solution
4. Wait until appears in the display
03
and a sponge to wipe down the inside of the ice bin
a. Using the funnel and cleaning tube, slowly pour
and scoop. Rinse with clean potable water.
3⁄4 of the cleaning solution into the dispenser
tube. Air and some water will exit the vent tube.
Remove cleaning tube. (Optional - for deeper
cleaning, allow solution to soak for 60 minutes)
b. Press and release
. 04
5 will appear in the display
a. The machine will circulate the solution, cleaning
and sanitizing the internal components, for
approximately 20 minutes.
b. While the machine is circulating the cleaning
solution, use 1⁄2 of the remaining cleaning solution
and a sponge to wipe down the inside of the ice bin
and scoop. Rinse with clean potable water.
34
u-line.com
Cl
for 10 seconds
Vent Tube
Ice
Dispenser
Tube
Vent Tube
Ice
Dispenser
Tube