U-Line UONP115SS01B Quick Start Manual page 30

QUICK START GUIDE
QUICK START GUIDE
Your clear ice machine is preset to produce ice between
the optimal dimensions illustrated below:
Cube Details
1/4" TO 1/2"
(6.4 mm to 12.7 mm)
DIMPLE
Factory Default Setting - 0
THINNER BRIDGE
DEEPER DIMPLE SHALLOWER DIMPLE
< 0
SETTING
Ice thickness adjustments are made using the control
panel as follows:
1. To enter the thickness adjustment mode:
• Press and hold for 5 seconds.
• The display will switch to "0" to confirm the
thickness adjustment mode has been selected.
The factory setting is "0". Use
thicken the ice bridge, or
the ice bridge.
Ice cubes in any given batch will vary, so it is necessary
to choose cubes from the sample area for comparison
when making adjustments.
1/16" TO 1/8"
(1.6 mm to 3.2 mm)
ICE BRIDGE
THICKER BRIDGE
> 0
SETTING
to raise the setting and
to lower the setting to thin
USER GUIDE
Ice
NUGGET ICE MACHINES
Ice
NUGGET ICE MACHINES
The Nugget Ice Machine produces cylindrical bits of
compressed ice approximately
The Nugget Ice Machine produces cylindrical bits of
compressed ice approximately Ice is produced until the machine senses the bin is full. As
ice slowly melts in the bin, the level of ice drops and ice
Ice is produced until the machine senses the bin is full. As
production resumes. This ensures a constant supply of
ice slowly melts in the bin, the level of ice drops and ice
fresh ice is always available.
production resumes. This ensures a constant supply of
fresh ice is always available.
The factory default ice setting is 0, which produces a firm
and compact ice nugget. U-Line's exclusive U-Choose™
ice adjustability feature allows you five levels of
adjustment from 0 to -5. At -5 the ice is soft and
chewable.
To adjust the ice density:
1. Hold for 5 seconds - display will flash current ice
setting
2. Adjust using or
3. Confirm setting by pressing
30
25
u-line.com
3 1
/ " x / ".
4 2
3 1
/ " x / ".
4 2