Table of Contents
Advertisement
Service Information of OLED TV (Bottom Screw) -1
It is necessary to pay attention to handling to prevent OLED panel bending. We recommend standing position with pedestal
when repairing. Some screws are placed on the bottom of the rear cover, it is difficult to remove them when standing with
pedestal. We propose how to remove bottom screws in next page.
1. Specifications of Bottom screws
Screw Type
Cross recessed hexagon
head screw
Specification of
Bottom screws
About 61 - 72mm
Working space
The surface of
the table
8 mm
2 mm
Screw position
2 positon
The bottom of the rear cover
Working space : TH/TC-**FZ1000 / TX-**FZ950 = 72mm
TH/TC-**FZ950 / TX-**FZ800 = 61mm
OLED
84
Advertisement
Table of Contents
