Table of Contents
Advertisement
Rear Cover Disassemble / Assemble -3
From design concept, the rear cover structure for some model is changed. The screws are decreased and
there are hooks on the rear cover.
Target model : TX/TH/TC-49/43FX6##, TH-49/43FX5## ( other inch is same as previous model)
<Disassemble>
1.Remove all screws for rear cover.
2. Pull the bottom of rear
cover towards yourself.
*The left side is hard a little because
of hook next of the control button.
Panel
Rear Cover
GK board
Control button
<Side View from Top>
3. Lift the rear cover up and remove it.
*It is hard a little. Refer to right
structure drawing
<Assemble>
Push also next to control button
(top)
Rear Cover
Panel
<Side View>
(bottom)
1.Fit the top side of rear cover.
2. Push the circumference of
rear cover and right side of
control button and fit it.
Check that there is no
floating all circumference
and fix all the screws.
75
Advertisement
Table of Contents
