Technical Specification - Redexim Verti-Drain 7516 Operator And Parts Manual

1.0 TECHNICAL SPECIFICATIONS
Model
Working width
Working depth
Tractor speed @ 500 rev's at PTO
Hole spacing 65 mm (2-1/2")
Hole spacing 130mm( 5")
Hole spacing 195mm(7-1/2")
PTO speed
Weight
Hole spacing side-to-side
Hole spacing in driving direction
Recommended tractor size
Capacity (maximum)
Spacing 65 mm (2-1/2")
Spacing 130mm (5 ")
Spacing 195mm (7-1/2")
Shipping dimensions
Maximum tine size
Slip clutch setting PTO
Three point linkage
Transmission oil
Lubrication grease
Standard items
7516
1.60 mtr (5'4")
Up to 400 mm (16")
Up to 0.70 km/h (0.45 mph)
Up to 1.40 km/h (0.90 mph)
Up to 2.10 km/h (1.35 mph)
Up to 500 rpm
1130 Kg (2490 lbs)
129 mm (5") @ 24 mm (1") holes
65 mm (2.5")@ 12 mm (1/2") holes
50 – 195 mm ( 2 - 7-1/2")
45 HP with lift capacity of minimum 1350 Kg
( 3000 lbs)
Up to 1120 sq.mtr (10200 sq ft)/ hour
Up to 2240 sq.mtr (20400 sq.ft)/ hour
Up to 3360 sq.mtr (30600 sq.ft)/ hour
1780 x 1000 x 1500 mm
(71"x 40"x 60")
Solid 25 x 400 mm (1"x 16")
Hollow 32 x 300 mm (1-1/4"x 12")
Maximum 800 Nm. (7080 lb.inch.)
3- point CAT 1-2
Life time grease EP 00
EP 2
Set solid tines 18/300 (3/4"x 12") with adapters
Front and rear roller
3- shuttle gearbox
Toolbox with combi tool
5