Cleaning Under Running Water - Silvercrest SRR 3.7 D3 Operating Instructions Manual

Long hair trimmer
■ Clean the long hair trimmer
e
brush .
■ Oil the long hair trimmer
of sewing machine oil.

Cleaning under running water

1) Take hold of the cutting unit
3
recesses
2) Hold the cutting unit
flows through the shaving heads from the inside to the outside.
ATTENTON!
► Hold only the cutting unit
handset can be damaged irreparably if it is held under running
water.
3) Allow the cutting unit
4) Replace the cutting unit
snaps into place and is seated firmly.
SRR 3.7 D3
4
4
around every 6 months with a drop
and pull it off.
2
under the running water so that the water
2
2
to dry.
2
flush on the appliance. Ensure that it
after every use with the supplied
2
with three fingers in the grip
under running water! The shaver
GB │ IE │
13 ■