Intended Use; Before First Use; Assembling The Auxiliary Handle And Depth Limiter; Inserting Tool Bits - Westfalia 85 93 08 Original Instructions Manual

Intended Use

The impact drill is intended for impact drilling in brick, concrete
and stone as well as for drilling in wood, metal and plastic.

Before first Use

Remove the impact drill from the packaging. Keep packaging
material out of reach of small children. There is risk of suffoca-
tion!
Important: Before any work on the machine itself, pull the
mains plug!

Assembling the Auxiliary Handle and Depth Limiter

1. Assemble the auxiliary handle (6) either on the left or on the
right side of the drill spindle, depending on whether you are left
or right handed, or to suit the drilling requirements accordingly.
Put the auxiliary handle on the drill spindle.
2. Fasten the auxiliary handle by turning the handgrip clockwise.
3. At any time you can turn the handgrip of the auxiliary handle
counter clockwise to change the angle/the position of the
auxiliary handle.
4. If required, you can insert the depth limiter (3) into the
corresponding retainer (2) directly above the handgrip.
Inserting the Tool Bit
1. The impact drill is fitted with a keyed drill chuck (1). Insert the
desired tool bit and tighten it manually. Then use the provided
drill chuck key (12) to fasten the bit firmly by tightening the
chuck evenly at the position of each of the holes in the jaws of
the chuck.
2. Always use a bit holder when working with screwdriver bits.
Operation
17