Table of Contents
Advertisement
27" LCD-TV
Store prog.: Allows to Save a channel on a new Program N°, to Insert a channel on an already existing Program No
(the channel previously saved on this program n° will be shifted to the upper program n°) or to Delete
the Program No.
- Once a channel has been found and named, use the
- Using the
/
buttons, select Save, Insert or Delete and press the OK button to confirm.
Swap prog.: Allows to swap 2 programme numbers.
- Using the
/
buttons select the Prog. Number option.
- Using the
/
buttons, select the program to be moved.
- Using the
button, select the Swap prog. option.
- Using the
button, enter the swap function.
- Using the 0~9 digit, enter the new programme number (3 digits).
- Press the OK button to confirm, the programme numbers are swapped.
Norm: Allows changing the audio norm.
- Using the
button, select the Norm option.
- Using the
/
buttons, select the norm.
Note: the following norms are available to choose from: I for the UK and Ireland, L/LP for France and Luxembourg,
D/K for Eastern Europe, the Middle East and Asia, B/G for Western Europe, Australia and New Zealand.
Skip: Allows skipping a channel.
- Using the
button, select the Skip option.
- Using the
/
buttons, select on, the channel will be skip.
Repeat this procedure to skip other channels.
Fine-tuning: If the picture is not clear, you can adjust the setting.
- Using the
button, select the Fine Tuning option.
- Use the
/
buttons to find the good tuning point.
Man. search: Allows launching a manual search.
- Using the
button, select the Man. search option.
- Using the
/
buttons, start the search in decreasing or increasing order.
The menu is replaced by a sub-menu showing the progression of the search.
- The search will stop at the first channel found; Man. installation menu is displayed again (within 3 seconds).
- If you wish to memories the channel, select Store Program option using
previous page. Otherwise, continue the search using
If you have modified Norm, Skip, Fine-tuning options or if you have launched a Manual Search, select Store Prog.
Option using
/
Press the EXIT button to exit the PIP menu.
buttons and proceed as indicated above to save your modification.
button to select the Store prog. Option.
button and proceed as indicated in
/
buttons.
11
T27013
Advertisement
Table of Contents
