Table of Contents
Advertisement
27" LCD-TV
T27013
Setup
This menu allows selecting the language for the menus as well as the colour of the screen when there is no video
input. It allows also setting an automatic shut-off time.
Display the Main menu by pressing MENU button. Select the Options menu using the
button. Press the OK button
to confirm Use the
/
buttons to select each option.
Menu language: To select the language for the menus.
Menu timeout: To set an automatic shut-off time for Menu. Using
/
buttons select 5 > 10 > 20 > 30 > 40 >
50 seconds.
Menu background: Select Opaque or Transparent type.
/
Sleep Timer: To set an automatic shut-off time. Using
buttons select off > 15> 30 > 45 > 60 > 90 > 120
minutes. Once the time is ended, TV set automatically switch on standby mode. If you turn the TV on standby mode
after setting the sleep timer, setting will be erased. Set it again.
Blue Screen: To have a blue screen when there is no video input or when the RF signal is very bad. Using the
/
buttons select on. Select Off if you do not want the blue screen.
Teletext language: Using
/
buttons, select the character set that will be used for Teletext on this channel.
The following character sets are available: West Europe, East Europe, Cyrillic (Russia), Greek, Arabic, Persian,.
The character set determines how characters are displayed on Teletext screen.
Reset: Return to default settings. Press the OK button to return to default settings. Press the EXIT button to exit the
Options menu.
Note: this menu is removed automatically after a few seconds without using the remote control.
Note: You can display the remaining time before the automatic shut-off. To do that, press the sleep button
.
To cancel the automatic shut-off, press several times the sleep button
to display Sleep timer off.
13
Advertisement
Table of Contents
