Installing the Battery
Install the battery as shown in
Figure 63
Figure
63.
g030989
Servicing the Fuses
The electrical system is protected by fuses. It
requires no maintenance. If a fuse blows, check the
component or circuit for a malfunction or short.
1.
Park the machine on a level surface, disengage
the PTO, and engage the parking brake.
2.
Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3.
Release the operator cushion from the rear of
the machine.
4.
Pull out the fuse and replace it
5.
Install the operator cushion.
1. Optional accessory fuse
(15 A)
2. Power-takeoff (PTO) fuse
(10 A)
40
(Figure
64).
Figure 64
3. Charge fuse (25 A)
4. Main fuse (30 A)
g031414