Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Makita DLM535
Summary of Contents for Makita DLM535
- Page 1 INSTRUCTION MANUAL Cordless Lawn Mower DLM535 Read before use.
-
Page 2: Specifications
SPECIFICATIONS Model: DLM535 Mowing width (blade diameter) 534 mm No load speed Normal mode 2,800 min Noise reduction mode 2,300 min Part number of replacement Straight mower blade 191D52-7 mower blade Swing back mower blades *1 191D50-1 Swing back mower blades *2... -
Page 3: Save All Warnings And Instruc- Tions For Future Reference
Save all warnings and instruc- Remove foreign matters such as rocks, wire, bottles, bones and large sticks from the work tions for future reference. area before mowing to prevent personal injury or damage to the mower. Training Objects struck by the mower blade can cause Read the instructions carefully. - Page 4 13. Do not tilt the mower when switching on the 30. Avoid working in poor environment where motor, except if the mower has to be tilted for increased user fatigue is expected. starting. In this case, do not tilt it more than 31.
- Page 5 17. After using the machine, remove the adhered 10. After removing the battery from the machine or dirt and dry the machine completely before charger, be sure to attach the battery cover to storing. Depending on the season or the area, the battery and store it in a dry place.
-
Page 6: Installing The Handle
Use of non-genuine Makita batteries, or batteries that have been altered, may result in the battery bursting causing fires, personal injury and damage. It will also void the Makita warranty for the Makita tool and charger. Tips for maintaining maximum ►... -
Page 7: Removing The Mulching Plug
CAUTION: Hold the upper handle firmly so that it does not drop off your hand. Otherwise, the handle may fall and cause an injury. Attach the holders to the handle. Align the protrusions on the holder with the holes on the handle so that the protrusions fit in the holes. - Page 8 Attach the mulching plug while holding down the Installing or removing the grass lever, and then release the lever to lock the mulching basket plug. To install the grass basket, follow the steps below. Open the rear cover. ► 1. Lever 2. Mulching plug Attaching the discharge attachment ►...
-
Page 9: Functional Description
Open the right side cover, and then attach the To install the battery cartridge; discharge attachment. Pull up the locking lever, and then open the battery Insert the hooks of the discharge attachment under the cover. rod of the right side cover. ►... -
Page 10: Overload Protection
To remove the battery cartridge; Indicating the remaining battery Pull up the locking lever and open the battery cover. capacity Pull out the battery cartridge from the machine while sliding the button on the front of the cartridge. Only for battery cartridges with the indicator Pull out the lock key. -
Page 11: Control Panel
If you notice anything unusual with either of the main power switch is turned on. lock key or switch, stop the operation immediately and have them checked by your nearest Makita Authorized Mode switching button Service Center. Install the battery cartridges. Insert the lock key, You can switch the operating mode by pressing the and then close the battery cover. -
Page 12: Adjusting The Mowing Height
Pull the switch lever toward you while holding The table below shows the relationship between the number down the switch button, and then release the switch on the mower body and the approximate mowing height. button. Number Mowing height 20 mm 26 mm 32 mm 39 mm... -
Page 13: Adjusting The Handle Height
This machine is equipped with an electric brake. If the machine consistently fails to quickly stop the mower blades after releasing the switch lever, have the machine serviced at Makita Authorized Service Center. ► 1. Upper bolt 2. Lower bolt Adjust the handle height, and then tighten the upper and lower bolts firmly. -
Page 14: Operation
OPERATION Mowing WARNING: Before mowing, clear away sticks and stones from mowing area. Furthermore, clear away any weeds from mowing area in advance. WARNING: Always wear the safety goggles or safety glasses with side shields when operating the mower. CAUTION: If the cut grass or foreign object ►... -
Page 15: Emptying The Grass Basket
To maintain product SAFETY and RELIABILITY, ► 1. Front grip 2. Rear grip repairs, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Storing Centers, always using Makita replacement parts. Store mower indoors in a cool, dry and locked place. - Page 16 Removing or installing the mower NOTICE: When installing the mower blade, make sure that the protrusions on the blade support fit blade in the holes in the mower blade. For models equipped with swing back WARNING: The blade coasts for a few sec- onds after releasing the switch.
- Page 17 To remove the individual mower blade, turn the NOTICE: When tightening the nuts to install the bolt counterclockwise with box wrench 17 while holding individual mower blades, apply 30 N•m as tighten- the base plate. ing torque. NOTICE: When installing the individual mower blade, be sure to attach the spring washer in the direction as shown in the figure.
-
Page 18: Troubleshooting
Before asking for repairs, conduct your own inspection first. If you find a problem that is not explained in the manual, do not attempt to disassemble the machine. Instead, ask Makita Authorized Service Centers, always using Makita replacement parts for repairs. - Page 20 Makita Corporation 3-11-8, Sumiyoshi-cho, Anjo, Aichi 446-8502 Japan 885849-920 www.makita.com 20200720...