Advertisement
Getting Started
CHARGING WITH USB CABLE
To charge, with the USB cable provided, plug the USB cable
into a USB adaptor (not included) in a wall socket.
The cable LED will turn ON in green to indicate the power is
connected.
Plug the other end into the radio earphone jack.
The cable LED will then turn red to indicate the radio is charging.
The LCD
Note: If you don't turn off the radio, the radio will automatically
turn off during charging. Once charging is complete, turn radio
off, wait a few seconds then turn it back on.
Charge time from flat to full requires about 8 ~ 10 hours.
After charging, unplug the USB cable from the USB adaptor.
UHF2400-1
menu
SC /
MON
GREEN led on =
Power Connected
RED led on =
Charging
12
Icon will flash.
UHF2400-2
Advertisement
