Manual Operation - Frigidaire CFCM0934NW Use & Care Manual

Heating with multiple cooking stages
For best results, some microwave recipes call for different
power levels or different lengths of time for cooking. Your
microwave may be set to change from one stage to another
automatically (2 stages maximum).
Example: to cook food for 3 minutes at 80%power and
then 50% power for 6 minutes 30 seconds:
1. Press Power Level pad.
2. Use the number pads to enter power level
for the 1st stage. PL8 appears in the
display (80% power).
3. Press START/+30 sec pad. Display blinks to prompt
you for cook time.
4. Use the number pads to enter heating
time for the 1st stage (cook time may
be set up to 99 minutes and 99
seconds).
5. Press
START/+30 sec
6. Press Power Level for the 2nd stage
NOTE: Must be entered within 1-se cond from the
last input otherwise it starts pre
settimgs.
7. Use the number key to enter power level
for the 2nd stage. PL5 appears in the
display (50% power).
8. Press
START/+30 sec
9. Use the number pads to enter heating
time for the 2nd stage (cook time may
be set up to 99 minutes and 99
seconds).
10. Press START/+30 sec pad.
When heating has finished, you will hear 5
beeps and the screen will display End.
NOTE:
1. The "Convenience operation" can't be set as one of
multiple cooking.
2. If the 1st stage is the set defrost feature, the 2nd stage
can't be set to Defrost again. If one of the stages is
weight defrost, that will be the 1st stage when cooking
starts.

Manual Operation

POWER
LEVEL
POWER
LEVEL
vious entry
pad.
Adding cook time (+30sec)
This feature will let you quickly start 30 seconds cooking at
a 100% power level. This feature may be used while
cooking and with cook time remaining. Each press of this
pad will add 30 seconds.
Example: to add 1 minute of cook time at the power
level of 100%:
Press
START/+30 sec
NOTE: The "+30sec" function can't be set when using the
"weight defrost" and "convenience operation" feature.
Setting Defrost by Weight
Example: to defrost 0.5 lbs. of food with the default
power level with cook time determined automatically:
1. Press Defrost pad once for weight defrost.
appear in the display.
2. Use the number pads to enter weight of
food to defrost in pounds. You may enter
weight from 0.5 to 7 lbs.
3. Press START/+30sec pad.
When defrosting has finished, you will hear 5 beeps and
the screen will display End.
NOTE: The weight amount must be a valid entry for this
feature to start. A valid weight entry is 0.5 to 7 lbs. A
decimal point is assumed before the right-most digit. For
example, enter 5 for 0.5 lbs. and enter 50 for 5.0
lbs.
Setting Defrost by Time
Example: to defrost food with the default 30% power
level for 5 minutes:
1. Press Defrost pad twice,
display.
2. Use the number pads to enter desired
defrost time (defrost time may be set up to
99 minutes and 99 seconds).
3. The default defrost power is PL3. To change the
power, please press
numeric pad to enter the power level.
4. Press START/+30sec pad.
When defrost has finished, you will hear 5 beeps and the
screen will display End.
EN-10
pad 2 times.
dEF1
will appear in the
dEF2
once, then press
Power Level
will