Fisher & Paykel OB90S9MEPX1 User Manual page 39

Alert code Possible causes
The oven has overheated.
Door lock error: the door cannot
A
be locked after you have started a
Self Clean cycle.
Door lock error: the door cannot
A3
be unlocked after a Self Clean
cycle has finished.
Technical fault.
F +
+ number
Alert codes
What to do
Allow the oven to cool down.
1
If the door is locked, wait until it
2
automatically unlocks.
Once the oven has cooled down and
3
the door has unlocked, the alert code
will disappear. You can now use the
oven again.
Disconnect the oven from the power
1
supply, then connect it again.
Wait approximately 10 seconds. This is
2
to allow the door lock to return to its
initial position.
Set the clock. See 'Setting the clock
3
and first use' for instructions.
Try starting a Self Clean cycle again,
4
making sure that you close the door
firmly. See 'Using the Self Clean
function' .
Disconnect the oven from the power
1
supply, then connect it again.
Try pressing on the oven door to help
2
the door lock disengage.
If this doesn't help and the alert
3
code reappears, call your Authorised
Repairer or Customer Care.
Note down the alert code.
1
Wait until the cooling fans have
2
stopped and the oven has completely
cooled down.
Disconnect the oven from the power
3
supply.
Call your Authorised Repairer or
4
Customer Care with the alert code
information.
37