General Safety Statements - Emerson DIXELL MRLDS-450 Installing And Operating Instructions

1.3 General Safety Statements

IMPORTANT: Before using this product, carefully read and strictly follow the
instructions in the manual. Ensure that all product documentation is retained and
available to anyone operating the instrument.
DANGER: This instrument is neither certified nor approved for operation in
oxygen-enriched atmospheres. Failure to comply may result in personal injury or
death.
WARNING: Use this product only for the purposes specified in this document and
under the conditions listed.
WARNING: This instrument has not been designed to be intrinsically safe for use
in areas classified as being hazardous locations. For your safety, DO NOT use it in
hazardous (classified) locations.
WARNING: In the event of an alarm or over-range condition, the sensor must be
recalibrated to ensure continued accuracy.
WARNING: This product must be recalibrated if installed in a non-room condition
environment (i.e. temperature or humidity extremes).
WARNING: The gas diffusion path can become occluded (moisture, dust, debris,
frozen condensation) over time resulting in reduced or complete lack of gas
detection and alarming function. Routine visual inspection of the gas detector and
bump testing are suggested to ensure proper gas detection and alarm function.
CAUTION: Except for maintenance detailed in this manual, these products should
only be opened and / or serviced by authorized technical personnel. Failure to
comply may void the warrant.
CAUTION: Operator assumes responsibility for complying with all laws, rules and
regulations governing the use of this product.
CAUTION: Use only genuine parts and accessories. Failure to comply may impair
the operation of the product and / or void the warranty.
CAUTION: Only operate the product within the framework of a risk-based alarm
signaling concept.
1592018550 MRLDS-450 GB r.1.2 29.05.2020 MRLDS-450 7/39