Table of Contents
Advertisement
Quicksilver 755SD — System & Component Overview and Operation
Teak Cockpit Table
Half table
20. Ski Pole (optional)
Your boat may come equipped with an optional ski pole for water skiing. To use, remove the ski pole
deck plate, located on centerline in front of the motorwell. The ski pylon slides into the deck plate and
connects to the ski tow base, located in the bilge.
The ski tow deck plate has rubber O-ring gaskets to minimize the amount of water that could
potentially enter the bilge. Quicksilver® suggests that prior to installing or removing the ski pylon,
spray water on the ski pole to help slide it through the deck plate.
When the ski pole is not in use, Quicksilver® recommends that you secure the pole in the cabin.
Ski Pole
The deck plate is a downflooding point. When the ski pole is
not in use, verify that the deck plate is properly installed.
Failure to do so may result in injury or death.
Full Table
Remove the ski pylon from the base before raising engine to
trailer mode to avoid any damage to the engine cowl.
37
Ski pylon
Deck plate
Stern eyes
Ski pole base
Advertisement
Table of Contents
