Yamaha Grizzly 450 2010 Owner's Manual page 117

TIP
G
The radiator fan is automatically switched on or
off according to the coolant temperature in the
radiator.
G
If the engine overheats, see page 8-61 for fur-
ther instructions.
EBU23605
To change the coolant
EWB01890
WARNING
Wait for the engine and radiator to cool before
removing the radiator cap. You could be
burned by hot fluid and steam blown out under
pressure. Always place a thick rag over the cap
when opening. Allow any remaining pressure
to escape before completely removing the cap.
1. Place the ATV on a level surface.
2. Remove panels D and E. (See page 8-10.)
3. Place a container under the engine, and then
remove the coolant drain bolt and its gasket.
(Use a trough or a similar object as shown to
prevent coolant from spilling on the footrest.)
2
1
1. Coolant drain bolt
2. Gasket
1. Trough
8-28
8