Yamaha Grizzly 450 2010 Owner's Manual page 112

2
1
1. Final gear oil drain bolt
2. Gasket
5. Install the drain bolt and its new gasket, and
then tighten the bolt to the specified torque.
8
Tightening torque:
Final gear oil drain bolt:
22 Nm (2.2 m·kgf, 16 ft·lbf)
6. Refill with the recommended final gear oil to
the brim of the filler hole as shown. NOTICE:
Be sure no foreign material enters the final
gear case.
[ECB00421]
1 2
3
4
1. Final gear oil filler bolt
2. Gasket
3. Final gear oil
4. Correct oil level
Recommended final gear oil:
See page 10-1.
TIP
If the recommended oil is not available, SAE80W-
90 API GL-5 Hypoid gear oil may be used instead.
However, when using this oil, noise from the final
gear case may occur when applying the rear
brake.
8-23