Cleaning Your Hand Mixer; Troubleshooting - KitchenAid KHM512BM Instructions Manual

Cleaning Your Hand Mixer

Electrical Shock Hazard
Do not put in water.
Doing so can result in death or
electrical shock.

Troubleshooting

First try the solutions suggested here and possibly avoid the cost of service.
If your Hand Mixer should
malfunction or fail to operate,
check the following:
1. Is the Hand Mixer plugged in?
2. Is the fuse in the circuit to the Hand
Mixer in working order? If you have
a circuit breaker box, make sure the
circuit is closed.
3. Try unplugging the Hand Mixer, then
plug it back in.
12
Always unplug Hand Mixer before cleaning.
Do not immerse Hand Mixer in water. Wipe
Hand Mixer with a warm, sudsy cloth; then wipe
clean with a damp cloth. Dry with a soft cloth.
Turbo Beater™ Accessories,
Whisks*
Always remove accessories from Hand Mixer
before cleaning. Wash in dishwasher, or by hand
in warm, sudsy water. Rinse and wipe dry.
Power Cord
Wipe cord with a warm, sudsy cloth; then wipe
clean with a damp cloth. Dry with a soft cloth.
* Not included with all Hand Mixer models; see
"Accessories"section for details and ordering
information.
If the problem cannot be fixed with the
steps provided in this section, then contact
KitchenAid or an Authorized Service Center.
USA/Puerto Rico: 1-800-541-6390,
Canada: 1-800-807-6777,
Mexico: 01-800-024-17-17
(JV Distribuciones)
or
01-800-902-31-00
(Industrias Birtman)
See the "Warranty" section for additional
details. Do not return the Hand Mixer
to the retailer – they do not provide service.