Tv Function - The Singing Machine STVD-919 Instruction Manual

TV FUNCTION

Prior to power your Singing Machine on, connect your TV aerial Antenna Jack (75 ohm) located on the back of
the unit.
Press the POWER button, the power LED indicator will illuminate. After a few seconds the screen will display a
picture along with the audio. The Singing Machine requires tuning to select an available TV station in your area.
PRE-SETTING THE TV STATIONS ONTO
THE SINGING MACHINE MEMORY
Note: - Preset tuning can only be completed in TV
function.
- If the Singing Machine is not in the TV function
mode, press the Function selector button on
the front of the system or press TV/AV1/AV2
or TV/DVD on the remote control to switch to
TV mode.
MEMORIZE CHANNELS
TV channels can be searched automatically.
are up to 181 channels that can be set.
1. During MENU > PRESET menu, press the
MENU CURSOR buttons to select the
MEMORIZE CHANNELS.
PRESET
LANGUAGE
CHANNEL
SKIP
RECEPTION
MEMORIZE CHANNELS
SELECT
2. Press the MENU CURSOR, select the right
direction button to start the automatic scanning
process. The scanning will begin from VHF
through to UHF. The TV stations will
automatically store onto the memory of the
system.
MEMORIZE ALL
AIR CHANNELS AIR CHANNELS
3. When scanning is completed, the system will
tune itself to the lowest channel.
4. When ending the auto search, press the MENU
CURSOR down button.
5. To exit the menu press the MENU button.
There
ENGLISH
2
ON
AIR
ADJUST EXIT
MENU
E18
BASIC OPERATION OF TV
CHANNEL SELECT
Channel can be selected by pressing the CH
buttons on the system or CHANNEL
buttons on the remote control.
Specific channel selection can be achieved by
pressing the Number buttons (0-9, -/--) on the remote
control.
Note:
- -/-- button will only work in TV function mode.
/
/