Table of Contents
Advertisement
To switch back from the standby mode: briefly press the C key or open the refrigerator compartment
door. If the Eco function or the intensive freezing (freezer boost) function are activated, then the D or
E key, respectively, may also be used to switch back from the control unit standby mode, depending
on which function is activated.
Intensive freezing (freezer compartment)
•
Use this setting after switching on the appliance for the first time, before cleaning, or before
inserting a large amount of food.
•
Refrigerator compartment temperature can be set or adjusted while intensive freezing function is
activated. You may do so when the B2 symbol is lit up. Set the temperature by briefly pressing
the C key. The intensive freezing function remains activated nevertheless.
•
If intensive freezing (freezer boost) is activated, then the indicator
D1 will remain lit. All other indicators are off.
•
If the Eco function is acticated, the indicator E1 will still be displayed
in standby mode. All other indicators are off.
•
If the manual freezer compartment defrosting function is activated,
then Cd will still be displayed on the C1 display unit, even when the
control unit is in the standby mode. All other indicators are off.
To activate: press the D key to activate the intensive freezing (super
freeze) function. You will hear a beep and indicators B1 and D1 will light
up. FF will appear on the display unit C1. FF will be lit up as long as the
function is active if display B1 is selected with the B key.
After 30 seconds, the display will automatically switch to the refrigerator
compartment display
set for the refrigerator compartment will be displayed on the C1 display
unit. Symbol D1 will be lit up as long as the function is active.
the symbol B2 will light up and the temperature
21
Advertisement
Table of Contents
