Smirthwaite will not be responsible for any damage caused by the misuse, neglect or purposeful destruction of the Unit and/or its associated components. The Mobile Hoist and its associated parts are certified to a maximum load of 130 kg. Do not exceed the •...
The Mobile Hoist is not intended to be used in environments where there are rapid changes in the environmental temperature and humidity during intended use. Device Name Order Code Smirthwaite 130 (130 kg Safe Working Load) 3515 Table 1 993151-en-gb – Revision A - 04 . 2023...
BS EN ISO 10535 before its use. The slings with a safe working load of 130 kg that can be used with the Mobile Hoist are shown below in the Table, complete with product codes. For all components, the lowest maximum safe working load must always be adhered to.
Technical Specification 4 . 1 Mobile Hoist Dimensions All dimensions below are shown in millimetres. Figure 11 Figure 12 993151-en-gb – Revision A - 04 . 2023 7 of 12...
Overall Width 625 mm Ground Clearance 15 mm Front and Rear Castors Size 75 mm and 100 mm Weights: Safe Working Load (SWL) 130 kg Full Product 40 kg Base Assembly 18.5 kg Mast & Boom Assembly 21.5 kg Operational Forces:...
To ensure the safety and continued good function of your Hoist, routine service must be performed on your Mobile Hoist. Service should be completed by a Smirthwaite approved service engineer every 6 months to ensure the products required standard is maintained. The service history of the product should be documented each service in the Service Log at the back of this User Manual.
Cleaning Please follow the cleaning guidelines below on cleaning and disinfecting the Hoist. 7 . 1 . 1 General Cleaning It is recommended to clean the Mobile Hoist and accessories before the use by a different patient, reducing the risk of cross–contamination. The exterior of the Mobile Hoist can be cleaned using a damp soapy cloth for general cleaning duties.
Page 11
User notes: 993151-en-gb – Revision A - 04 . 2023 11 of 12...
Page 12
While every effort has been made to ensure the accuracy of information contained in this user manual, no liability can be accepted by Smirthwaite for any errors or omissions. Smirthwaite operates a policy of continuous improvement. Specifications and other data are subject to change without notice.
Need help?
Do you have a question about the 130 and is the answer not in the manual?
Questions and answers