Fanimation SLINGER LP8147SLMWBN Manual page 15

How to Operate Your Ceiling Fan (continued)
5. To set the remote code same positions as the
receiver with a small screwdriver or ball point pen
(neither included), slide dip switches firmly up or
down. (Figure 5)
NOTE: Factory setting is all up. Do not use this
position.
NOTE: The remote unit has 32 different code
combinations. To prevent possible interference from
or to other remote units, simply change the
combination code in the remote and receiver.
6. Replace battery cover on the remote control and
secure with the previously removed screw. (Figure 6)
7. Remote functions: (Figure 7)
• Indicator LED light: fan speed and light
dimmer indicator
• button: Tap once to turn off the fan. Press and
hold this button for 5 seconds to turn on or turn off
the buzzer.
• Fan Speed:
Turn on fan and turn speed up.
Turn on fan and turn speed down.
• Light button: Turn ON\OFF the light.
Press to turn on the light and hold to dim or
brighten light to desired level, then release.
Press this button to switch color temperature
when the light is on.
• Sleep Timer:
The fan and light will turn off after 1 hour.
The fan and light will turn off after 3 hours.
The fan and light will turn off after 6 hours.
• Home Away: Tap this button, the light will
blink twice signaling this feature is on; the fan
will turn off and the light will randomly turn on
and off while you are away. Pressing any button
will cancel the feature.
• Fresh Air: Fan speed will modulate to
simulate a natural breeze.
• Safe Exit: Tap once, the light will blink once;
fan and light will turn off after 1 minute. Pressing
any button will cancel this feature.
Remote
Control
Dip Switch
• Reverse button:
In order to reverse the direction of the fan, the fan
must be running.
Summer - The fan runs counterclockwise.
Airflow will provide a downward cooling breeze.
Winter - The fan runs clockwise. Airflow will force
warm air downward without a noticeable breeze.
15
Figure 5
Figure 6
Figure 7