Table of Contents
Advertisement
Problem
Coffee dispensing is
repeatedly interrupted
and the message
bean container
appears in
the display.
The coffee machine
does not switch itself
on even though the
setting has been
at
activated for the timer.
Steam is dispensed
instead of water while
preparing hot water or
making tea.
Possible cause and solution
This is not a fault.
The brew unit has not detected the ground coffee.
Fill the
Certain types of coffee produce a small amount of
coffee when they are ground. In such cases, the
grinder is usually set to fine and the minimum
quantity of coffee is set.
Confirm the message with OK.
If the display appears with all types of coffee:
Set the grinder to a coarser setting (see "Grinder
setting").
Select a larger quantity of coffee.
Don't forget to check any drinks changed in
"Profiles".
If the message only appears when dispensing certain
drinks:
Check the quantity of coffee set for this drink (see
"Quantity of coffee"). Select a larger quantity of
coffee.
You may also need to set a coarser grinder setting.
The system lock is activated.
Deactivate the system lock.
On
The current day of the week has not been selected.
Check the timer settings and change these if
necessary.
The coffee machine was not used after being
switched on automatically three times in succession
(vacation mode).
Switch the machine on and dispense a drink.
The coffee machine does not switch on with the
at
timer while automatic descaling is being carried
out. This is not a fault. Select a different timer
setting.
It is likely that the wrong altitude has been set.
Change the altitude settings (
If necessary, you can also change the temperature
settings for the drinks (
Frequently Asked Questions
Drinks parameters
On
Settings
Altitude
).
).
97
Advertisement
Table of Contents
