Table of Contents
Advertisement
In Expert mode, you can allocate a
bean type temporarily and change the
portion size while the drink is being
made. The setting will not be saved and
will only apply to the current drink.
Activating and deactivating
Expert mode
Expert mode is located in the pull-down
menu at the top edge of the screen.
Tap the top edge of the screen in the
middle and drag down with your
finger to open
The schematic representation of the
bean containers is displayed.
Tap
Expert Mode
Expert mode is active when
is highlighted in orange.
To exit the pull-down menu, drag the
menu window back up to the top or
tap an area of the screen outside of
the pull-down menu.
Expert mode: allocating bean
containers temporarily
Tap the top edge of the screen and
open the
Expert Mode
menu.
Now select the bean container
containing the beans you want to use
for the current drink.
To close the menu window, drag it
back up to the top.
If necessary, switch to the drinks
menu.
Now start making the drink.
Expert Mode
.
.
Expert Mode
pull-down
Expert mode: changing the
portion size
The drinks menu is displayed.
If you select DoubleShot or
2 portions , Expert mode cannot be
used to change the portion size.
Select a drink.
Dispensing will start. You can adjust the
portion size while it is being dispensed,
e.g., individually change the amount of
hot milk, milk froth, and espresso for a
latte macchiato.
Dispensing
Tap the bar and adjust the indicator
(small triangle) as you wish.
Expert Mode
43
Advertisement
Table of Contents
