Setting The Shutter Speed Dial; With 2-Pin Sync Cord Sc-20 - Nikon Medical-Nikkor 120mm f/4 IF Instruction Manual

SETTING THE SHUTTER SPEED DIAL
The shutter speed setting necessary for proper flash
synchronization depends on the type of sync cord used,
the film speed set on the lens ASA/ISO ring and the
• With 2-pin Sync Cord SC-20
~
F3·Series
FA , FE2,
(via AS·4 or
FM2 (with
FE
ASA/ISO
AS-7)
1/250 sec.
film speed sync speed)
1/80 sec. (X) 1/250 sec. 1/ 125 sec.
800-100
or slower or slower or slower
80--25
1/60 sec. 1/125 sec. 1/60 sec.
or slower or slower or slower
• With 3-pin Sync Cord SC-22
~
F3·series
(via AS·4
FA, FE2 FE
ASA/ISO
or AS·7)
film speed
AUTO,
800-100
All settings* All settings* 1/125 sec.
or slower*
80-25
1/60 sec. 1/125 sec . 1/60 sec.
or slower
or slower or slower
Nikon or Nikkormat camera you are using. Please refer
to the table below for the appropriate shutter speed
setting .
FM2 (with
1/200 sec.
sync speed)
1/200 sec.
(X200)
or slower
1/ 125 sec.
or slower
FM2 (with FM2 (with
1/250 sec. 1/200 sec.
F-301 / N2000 ,
EM
sync speed) sync speed)
FG
1/250 sec.
1/200 sec.
or slower
(X200)
All settings* All settings*
or slower
1/125 sec. 1/125 sec. 1/60 sec.
B
or slower or slower or slower
* With the camera set for automatic operation or at certain manual shutter speeds, the proper sync speed is automatically set when
the power supply for the Medical-Nikkor 120mm f/41F lens is turned on.
11