Setting The Aperture - Nikon AF-S VR Micro-Nikkor 10Smm fl2.8G IF-ED Instruction Manual

Nano crystal coat
Hide thumbs Also See for AF-S VR Micro-Nikkor 10Smm fl2.8G IF-ED:
Table of Contents

Advertisement

9. Setting the aperture
Set the aperture on the camera body. When exposure (or shooting) mode is set at
II
A"
(Aperture Priority auto) or
II
M
II
(manual), the camera will control to maintain the
predetermined f-number (up to approx. 1.6 stops) as the effective f-number varies
with shooting distance.
10. Using bayonet hood HB-38
.Attaching the hood
Align the lens hood attachment index (.- )
cg:,
on
~ (3)
the hood (either one of the two indexes) with the lens _
~
hood mounting index @ on the lens, and turn the
~~\--;
lens hood
CD
clockwise until it click stops to secure.
0\\/
• Make sure that the lens hood mounting index @
/\
aligns with the lens hood setting index (-0) @.
:~\
~--
..
~a~h~~~:~.
hood is not correctly attached, Vi9nettin9U.... .
;!
• To facilitate attachment or removal of the hood,
.
> '
hold it by its base (around the lens hood
.\ ..... -;:f/i
attachment index) rather than its outer edge.
• To store the lens hood, attach it in the reverse
position .
• Detaching the hood
While holding the base of the hood (near the lens hood attachment index) rather than
its outer edge, turn it counterclockwise to detach.
11. Flash pictures using cameras with a built-in flash
To prevent vignetting, do not use a lens hood
CD.
23

Advertisement

Table of Contents
loading

Table of Contents