Table of Contents
Advertisement
B
NUT2
Correct Installation:
The SSD's PCB is in proper place, and
the M.2 heatsink can be screwed in.
Incorrect Installation:
The SSD's PCB sits between M.2 heatsink
and standoff. Do not continue.
50
NUT1
Step 6
Tighten the screw with a
screwdriver to secure the
module into place. Please do not
overtighten the screw as this might
damage the module. Skip Step 6 if
your M.2 SSD module is Type 2280.
Step 7
Before securing the M.2 heatsink,
make sure to align the notch on
the SSD to the standoff on the
motherboard if you use a Type 2280
SSD module; otherwise, the SSD
module may be damaged.
*The illustrations here are for
reference only.
Hide quick links:
Advertisement
Table of Contents
