Table of Contents
Advertisement
Read First
■
Map operations
You can touch a position on the map, and then check that position
during navigation. The map's current position tracking function stops
(the car marker (a blue arrow by default) is not fixed in position on the
screen), and the control buttons are displayed allowing you to change
the map display.
Operation
Button
Using drag &
No buttons
drop to move the
map
96 Navigation
Explanation
You can move the map in any direction
you want by touching and holding the
map, and moving your finger in the
direction you want to move the map.
Operation
Button
Zoom in/Zoom
/
out
Tilt up/Tilt down
/
Rotate left/Rotate
/
right
Explanation
Change the area of the map displayed
on the screen.
Road names and other characters are
always displayed in the correct
direction and at the same font size, and
you only need to check necessary
roads and icons.
In 3D mode, the map cannot be
reduced endlessly. The map changes
to 2D mode if you zoom out beyond
the defined amount.
The display changes slowly if you tap
the button, or changes in a smooth,
continuous motion if you touch & hold
the button.
In 3D mode, you can change the
vertical display angle of the map.
The display changes slowly if you tap
the button, or changes in a smooth,
continuous motion if you touch & hold
the button.
Changes the horizontal display angle
of the map.
The display changes slowly if you tap
the button, or changes in a smooth,
continuous motion if you touch & hold
the button.
Advertisement
Table of Contents
