Table of Contents
Advertisement
Other Operations
•
Next
(Next):
Display the next page of the command list.
AV Operation
(AV Operation):
Display the command list for the current audio operation. (Only
when an audio source is being used.)
AV Source
(AV Source):
Display the audio source command list.
Phone
(Phone):
Display the handsfree operation command list. (Only during
handsfree connection.)
Navigation
(Navigation):
Display the navigation operation command list.
3
Check the command that you want to use in the
command list.
• You can perform the operation by saying the displayed
command.
286 Other
Examples of Using the Voice Control System
This section describes examples of operating the voice control system.
For the voice commands, see "Voice Command Lists" on Page 290.
The notations used in the commands are as follows.
•
<
>: Commands to be spoken
•
: Names to be spoken
■
Changing the audio mode
1
Perform a voice input for the audio mode to which you
want to change. (USB in this example.)
• Say "USB".
• The mode changes to USB.
■
Changing the radio frequency
1
Say "Seek up".
• The current frequency switches to the next receivable
frequency.
• Saying "Seek down" switches the current frequency to the
previous receivable frequency.
Advertisement
Table of Contents
