Table of Contents
Advertisement
NOTE
•
Insert the map SD card without locking it.
•
If you insert an SD memory card that contains image data, you can preview
the images, play a slideshow, or set an image as the Opening screen. (See
Page 276.)
About SD memory cards
•
SD memory cards that are marked as follows can be used.
SD Logo is a trademark of SD-3C, LLC.
SDHC Logo is a trademark of SD-3C, LLC.
miniSD Logo is a trademark of SD-3C, LLC.
miniSDHC Logo is a trademark of SD-3C, LLC.
microSD Logo is a trademark of SD-3C, LLC.
microSDHC Logo is a trademark of SD-3C, LLC.
•
Multi Media Cards (MMC) cannot be used.
•
Supported capacities: 512 MB to 8 GB
•
Supported speed class: Class 2 to Class 10
■
Unloading an SD memory card
CAUTION
•
Touch
SD Eject
(SD Eject) before removing the map SD card.
Removing the card without first touching
Eject) may damage the data. No compensation will be given
for any damaged data.
•
When removing a disc or SD memory card from the unit, pull
it out horizontally. Do not strongly pull to the right side.
Also, do not strongly push to the left side while removing it.
Doing so may damage the SD memory card.
1
Press
.
2
Touch
.
Setup
• If
Setup
is not displayed, touch
3
Touch
(SD Eject).
SD Eject
Before Use
SD Eject
(SD
.
Introduction 17
Advertisement
Table of Contents
