Going Hunting; Marine Activities; Sailing; Tack Assist - Garmin EPIX GEN 2 PRO Owner's Manual

Going Hunting

You can save locations relevant to your hunt and view a map of saved locations. During a hunting activity, the
device uses a GNSS mode that conserves battery life.
1 From the watch face, press START.
2 Select Hunt.
3 Press START, and select Start Hunt.
4 Press START, and select an option:
• To navigate back to the starting point of your activity, select Back to Start, and select an option.
• To save your current location, select Save Location.
• To view locations saved during this hunt activity, select Hunt Locations.
• To view all previously saved locations, select Saved Locations.
• To navigate to a destination, select Navigation, and select an option.
5 After you complete your hunt, press STOP, and select End Hunt.

Marine Activities

Sailing

Tack Assist

The watch uses GPS-based course over ground to determine your course in the tack assist feature, and
does not account for other factors that can affect your boat's direction, such as currents and tides. You are
responsible for the safe and prudent operation of your vessel.
While cruising or racing into the wind, the tack assist feature can help you determine if your boat is being lifted
or headed. When you calibrate tack assist, the watch captures your boat's port
over ground (COG) measurements, and uses the COG data to calculate the mean true wind direction
boat's tack angle .
The watch uses this data to determine whether your boat is being lifted or headed due to wind shifts.
By default, the tack assist feature is set to automatic. Each time you calibrate the port or starboard COG, the
watch recalibrates the opposite side and true wind direction. You can change the tack assist settings to enter a
fixed tack angle or true wind direction.
Activities and Apps
CAUTION
and starboard course
and the
15