Yamaha WOLVERINE X2 2021 Owner's Manual page 38

The multi-function meter unit is equipped with
the following:
 speedometer
 odometer
 tripmeters
 clock
 hour meter
 voltage display
 coolant temperature display
5
 speed management icon
 fuel gauge
 brightness control mode
 error code display
Speedometer
The speedometer shows the vehicle's travel-
ing speed. The speedometer can be set to
"MPH" or "km/h". This also changes the
odometer and tripmeter units between miles
and kilometers. To change the display be-
tween "MPH" and "km/h", turn the key
to " " (off), then while holding the "SELECT"
button pushed, turn the key to "
Odometer and tripmeters
1
1. Odometer/Tripmeter A/Tripmeter B/Service
tripmeter/Error code display
2. "SELECT" button
3. "RESET" button
The odometer shows the total distance trav-
eled by the vehicle.
The tripmeters show the distance traveled
since they were last reset. The tripmeters can
be used to record the distance traveled on a
single trip, or to estimate the distance that
can be traveled with a full tank of gas, etc. The
service tripmeter shows the distance traveled
since it was reset at the last maintenance.
" (on).
5-7
2 3