1. Jumper cable negative lead
5. Start the engine. (See page 7-2.)
6. After the engine starts, disconnect the
negative lead of the jumper cable from
the frame and charged battery, and then
disconnect the positive lead of the jump-
9
er cable from the charged battery and the
battery in the vehicle.
7. Install the hood.
1
9-51
EBU32665
Fuse replacement
The fuses are located under the hood. If an
electrical problem is suspected, check the
fuses and replace if necessary.
General layout
4
3
2
1
1. Spare fuse
2. Accessory fuse "ACC"
3. Main fuse
4. EPS fuse
5. Fuel injection system spare fuse
6. Fuel injection system fuse
7. Fuse box
7
5
6