Yamaha WOLVERINE RMAX4 Owner's Manual page 139

Tightening torque:
Final gear oil filler bolt:
23 N·m (2.3 kgf·m, 17 lb·ft)
Changing the final gear oil
1. Park the vehicle on a level surface.
2. Place an oil pan under the final gear case
to collect the used oil.
3. Remove the final gear oil filler bolt, the fi-
nal gear oil drain bolt and their gasket to
drain the oil.
1. Final gear oil drain bolt
2. Gasket
4. Install the drain bolt and its new gasket,
Tightening torque:
5. Refill with the recommended final gear oil
6. Check the oil filler bolt gasket for dam-
7. Install the oil filler bolt and its gasket, and
2 1
Tightening torque:
8. Check for oil leakage. If oil leakage is
9-25
and then tighten the bolt to the specified
torque.
Final gear oil drain bolt:
20 N·m (2.0 kgf·m, 15 lb·ft)
up to the brim of the filler hole.
age, and replace it if necessary.
then tighten the bolt to the specified
torque.
Final gear oil filler bolt:
23 N·m (2.3 kgf·m, 17 lb·ft)
found, check for the cause.
9