How To Change The Setpoint Temperature From The Auto Run Screen - Nordson iDry Series Customer Product Manual

64 Nordson iDry® Series Induction Dryers
Figure 55 Auto Run Screen with Ambient Compensation Activated
Figure 56 Warning/Temperature Change Screen
1075452-05

How to Change the Setpoint Temperature from the Auto Run Screen

1. See Figure 55. Select the AMB/COMP button from the Auto Run screen.
See Figure 56.
2. Select the ENTER NEW DATA from the Warning screen.
3. A Pop-up screen will appear. Enter password.
4. Enter information into the PRODUCT TEMP SETPOINT field.
5. Select the COMPENSATION SETTINGS ACCEPTED button.
Ambient
Compensation
Button
© 2023 Nordson Corporation