Table of Contents
Advertisement
Specifications
Autofocus
Lens servo
Focus area
AF-area mode
Focus lock
Exposure
metering system
3D color matrix
Center-weighted
Spot
Exposure range
Exposure
meter coupling
Exposure modes
Exposure
compensation
Auto-exposure lock
Auto bracketing
214
(continued)
TTL phase detection by means of Nikon Multi-CAM1300 auto-
focus module; detection range –1 to 19 EV (ISO 100 at room
temperature)
Instant Single-servo AF (S), Continuous-servo AF (C), manual (M);
focus tracking automatically activated according to subject status
in single-servo and continuous-servo AF
Focus area can be selected from five focus areas
Single-area AF, Dynamic AF (supports closest subject priority)
Focus can be locked using the AE/AF lock button or, in single-
servo AF, by pressing the shutter-release button halfway
TTL full-aperture exposure metering system with three meter-
ing modes
3D color matrix metering using 1,005-pixel CCD supported when
type G or D Nikkor lens is attached; with other lenses, color
matrix metering using 1,005-pixel CCD is supported
Greatest weight (75% of total) given to a circle in the center of
the frame 8 mm in diameter
Exposure determined by 3-mm (0.12˝) circle in center of frame
(approximately 2% of frame); when a CPU Nikkor lens is attached,
any of the five focus areas can be used for spot metering
At ISO 100, room temperature, and with f/1.4 lens: 0 – 20 EV
(center-weighted or 3D color matrix metering) or 2 – 20 EV (spot
metering)
Combined CPU and AI
P
Programmed auto with flexible program
S
Shutter-priority auto
A
Aperture-priority auto
M
Manual (exposure adjustable in steps of
–5 to +5 EV in increments of
cator appears in viewfinder and top control panel
Locked at detected value when AE/AF lock button is pressed
2 – 3 exposures compensated in steps of
1
/
2
1
/
EV; exposure compensation indi-
3
1
1
/
,
/
, or 1 EV
3
2
1
or
/
EV)
3
Advertisement
Table of Contents
