Nikon D1H User Manual page 129

When flash exposure compensation is used,
amount of compensation is not displayed.
If the Speedlight is set at a distance from the camera using the SC-17 sync cord, correct
exposure may not be achieved at D-TTL settings other than standard D-TTL. We recommend
that you use standard D-TTL. When using standard D-TTL, take a test shot and view the
results in the monitor.
When using D-TTL flash control, use the flash panel provided with your Speedlight. Do not use
another type of flash panel, such as a diffusion panel, as this may introduce error into camera-
internal calculations, resulting in inappropriate flash exposure.
When the flash sync mode is set to slow sync or slow sync with red-eye reduction, select
programmed auto or aperture-priority auto exposure.
The shutter speeds and apertures that can be used with the SB-80DX, SB-50DX, and SB-28DX
are shown below.
Exposure mode
Programmed auto
Shutter-priority auto
Aperture-priority auto
Manual
* Shutter speeds are set automatically in the range
mode setting of slow sync.
** If a shutter speed faster than
shutter speed to
TTL can not be used for multi-flash photography.
Use Nikon Speedlights only. Using another make of flash could damage the internal circuitry of
the camera or flash. Before using a Nikon Speedlight not included in the list of compatible
Speedlights, contact a Nikon-authorized service representative for more information.
Shutter speed
Set automatically by camera
1
/ – 30 s
500
Set automatically by camera
1
/ – 30 s
500
1
/ s is chosen, the camera will automatically lower the
500
1
/ s when the Speedlight is turned on.
500
appears in the viewfinder display, but the
*
Set automatically by
**
*
Value chosen by user
**
, bulb
1 1
/ – /
500 60
Aperture
camera
1
s, or / –30 s at a flash sync
500
pg. 84
pg. 86
pg. 88
pg. 90
115