Table of Contents
Advertisement
Exposure Indicators
If the subject is too bright or too dark to allow correct exposure, the electronic analog expo-
sure display will flash and one of the following indicators will appear in the viewfinder and the
control panel on top of the camera:
Subject too bright; choose a higher f/-number or use an ND filter.
Subject too dark; choose a lower f/-number or use a flash.
Aperture Lock
Aperture can be locked at the selected setting (
2—EV Steps for Exposure Control (
By default, adjustments to aperture are made in increments equivalent to
desired, the size of the increments can be increased to
12—Assign Command Dial (
This setting can be used to reverse the roles of the command dials so that the main command
dial controls aperture while shutter speed is assigned to the sub-command dial.
22—Aperture Setting (
Use this setting when you want to adjust aperture using the lens aperture ring. Note that
aperture for type G lenses is always set using the command dials, regardless of the option
chosen for Custom Setting 22.
pg. 94).
pg. 161)
1
/
or 1 step.
2
pg. 166)
pg. 173)
1
1
/
EV (
/
step). If
3
3
89
Advertisement
Table of Contents
