Table of Contents
Advertisement
4
Choose an option for the selected setting
Press the multi selector to the right (A) to display a menu of options for the
selected setting (B).
A
Press the multi selector up or down to highlight the desired option, then press
the selector to the right to put your choice into effect and return to the custom
settings menu. To return to the custom settings menu without changing settings,
press the multi selector to the left.
When custom settings for the current settings bank
are modified from their default values, the CUSTOM
indicator will be displayed in the rear control panel.
Using the Function Button to Adjust Custom Settings
If CSM is selected in the Assign FUNC sub-menu, the
button can be used to make changes to custom settings. Keep-
ing the
button pressed, rotate the main command dial
until the desired settings number appears in the rear control
panel. Adjust the selected setting by rotating the sub-com-
mand dial while pressing the
button to put your selection into effect.
For more information on:
pg. 116 The Assign FUNC sub-menu
B
CSM MENU
F1 Image Review
OFF
ON
button. Release the
OK
159
Advertisement
Table of Contents
