AmazonBasics B01IN11WJ0 Instruction Manual page 7

Operation

Paper / Credit Card Entry:

Make sure you do not exceed sheet
count per pass (12 sheets max).
Insert paper as straight as possible
into feed slot and release.

LED Status
Indicators:
• Power On: The Green LED light indicates the shredder is "On" and ready to operate when
paper is inserted.
• Overheat: The Red LED light indicates the shredder has shred continuously beyond the
maximum running time and overheating, the unit will automatically shut off. If this happens,
switch the shredder Off for 30 minutes or longer before resuming normal operation.
• Overload: The Red LED light indicates when too much paper is inserted. Use the "Reverse"
mode to back up and reduce number of sheets.
• Misaligned: Mount the shredder securely to the rim of the waste basket.

Features a CD/DVD destroyer:
 Note:
• Always turn off and unplug the shredder when not in use.
• This shredder will shred staples and small paper clips. It is recommended that you remove
paper clips whenever possible to extend the lifespan of your shredder.
• Only shred credit cards by feeding them vertically i nto the middle of the feed slot, releasing
when shredding begins. Never feed more than one credit card at a time.
!
Caution:
Do not hold CD/DVD with finger through the
center ring while feeding into the shredder. Serious
injury may occur.
Never feed more than one credit card or CD/DVD at a time.
1) Hold the CD/DVD by the edge and feed one at a time, releasing
when shredding begins.
2) Shredder will stop when the entire disc has been destroyed.

Insert one credit card at a time into
the middle of the feed slot.
Misaligned / Overload
Overheat / Power On
7
ENGLISH