End Time; Childproof Lock; Activating And Deactivating; Basic Settings - Siemens CM656GB 1 Series Instruction Manual

Childproof lock

en
Cancelling the cooking time
Press the button to open the time-setting options
0
menu. Turn the time back. The type of heating and
temperature set are shown in the display.
Changing the cooking time
Press the button to open the time-setting options
0
menu. Change the cooking time using the rotary
selector.

End time

If you change the end time, please remember that
easily spoiled foods must not be allowed to remain in
the cooking compartment for too long.
Prerequisite: The selected operation has not already
begun. A cooking time has been set. The time-setting
options menu is open.
0
Example in the picture: You put the dish in the cooking
compartment at 9:30. It takes 45 minutes to cook and
will be ready at 10:15, but you would like it to be ready
at 12:45 instead.
Touch the "End " field.
y
1.
The end time is displayed.
Using the rotary selector, set a later end time.
2.
Confirm with the Start/Stop button.
3.
The oven is in standby. The operation starts at the
appropriate time. You can see the cooking time
counting down in the status bar.
The cooking time has elapsed
A signal sounds. The oven stops heating. "Finished"
appears in the status bar. You can cancel the audible
signal early using the
0
16
button.
Correcting the end time
This is possible if the oven is in standby. Use the
button to open the time-setting options menu, touch
"End " and use the rotary selector to correct the end
y
time. Press the button to close the menu.
0
Cancelling the end time
This is possible if the oven is on standby. To do so,
open the time-setting options menu using the
Touch "End " and reset the End time using the rotary
y
selector. The cooking time immediately starts to count
down.
AChildproof lock
Your appliance is equipped with a childproof lock so
C h i l d p r o o f l o c k
that children cannot switch it on accidentally or change
any settings.
The control panel is locked and no settings can be
made. The appliance can only be switched off using the
on/off button.

Activating and deactivating

You can activate and deactivate the childproof lock
when the appliance is switched on or off.
In each case, press the
seconds. A confirmation note appears in the display
and the / symbol appears in the status bar.
QBasic settings
There are various settings available to you in order to
B a s i c s e t t i n g s
help use your appliance effectively and simply. You can
change these settings as required.

Changing settings

Press the On/Off button.
1.
Press the menu button.
2.
The operating modes menu opens.
Select the "Settings" operating mode.
3.
The first basic setting appears and can be changed
using the rotary selector.
Touch the arrow.
¿
4.
Use the rotary selector to change the values.
5.
Use the arrow to switch to the next basic settings.
¿
6.
Press the menu button to save.
7.
"Save" or "Discard" appears on the display.

List of settings

This list tells you all the basic settings and how to
change them. Depending on the model of the appliance
you own, the display will show only those settings that
apply to your appliance.
0
button for approx. 4
/
0
button.