Display Assembly; Removing The Display Assembly - Dell Latitude 5420 Rugged Service Manual

4. Install the:
a) Heatsink
b) Bottom chassis cover
c) Batteries
5. Follow the procedure in

Display assembly

Removing the Display assembly

1. Follow the procedure in
2. Remove the:
a) Batteries
b) Bottom chassis cover
c) PCIe heatsink assembly
d) Docking port assembly
e) WLAN card
f) WWAN card
g) GPS module
h) Heatsink assembly
i) Hinge covers
3. Remove the two 'M2*3' screws [1] on the EDP bracket, and turn it up side down [2].
4. Pull and disconnect the EDP cable from the system board [3] and remove the two 'M2*3' screws [4] securing the hinges to base
assembly [5].
112 Removing and installing components
After working inside your computer.
Before working inside your computer.