Table of Contents
Advertisement
1
Safety
CAUTION
Risk of malfunctions, material damage or injuries!
Insufficient or inattentive cleaning or care of the system can lead to malfunctions, material damage or
injuries.
a) Check the sensors regularly for dirt and clean them if necessary.
b) Regularly remove dirt accumulations in the floor rail or under the floor mat.
c) Keep the system free from snow and ice.
d) Do not use aggressive or caustic cleaning agents.
e) Use road salt or loose chippings only conditionally.
f)
Lay the floor mat without folds and flush with the floor.
g) Equipment required for cleaning purposes such as ladders or similar must not be leaned on or
attached to the system.
CAUTION
Risk of material damage or injuries!
The door can open, close or turn unexpectedly. This may result in material damage or injuries.
a) No persons may be present in the opening area of the system.
b) Ensure that moving objects such as flags or parts of plants do not enter the detection range of
the sensors.
c) Do not make any settings on the control unit when the system is in use.
d) Have faults rectified immediately by specialist or personnel qualified to do so.
e) Remove objects from the opening area.
f)
Do not disassemble, put out of operation or manipulate safety devices.
g) Do not rush through a closing system.
CAUTION
Risk of bruising and severing of limbs!
If the system moves, careless behaviour can lead to serious injuries to limbs or severance of limbs.
a) Do not reach in when parts of the system are moving.
b) Keep a distance when parts of the system move.
c) Do not bump into or touch the system when it is moving.
d) Do not open or remove protective covers during operation.
e) Do not permanently remove covers from the system.
f)
Only carry out inspection, service, maintenance and cleaning when the system is stationary and
switched off.
CAUTION
Risk of material damage or injuries!
If safety devices are not functioning, manipulated or put out of operation, there is a risk of material
damage or injuries that can lead to death.
a) Never disable or manipulate safety devices.
b) Have inspection, service and maintenance of the safety devices carried out according to local
regulations or according to a maintenance contract.
8 / 32
BAL_FF_TWIN_EN_3V0_REC_121-006454269
Advertisement
Table of Contents
