Record FlipFlow Twin User Manual page 27

CAUTION
Risk of malfunctions, material damage or injuries!
Insufficient or inattentive cleaning or care of the system can lead to malfunctions, material damage or
injuries.
a) Check the sensors regularly for dirt and clean them if necessary.
b) Regularly remove dirt accumulations in the floor rail or under the floor mat.
c) Keep the system free from snow and ice.
d) Do not use aggressive or caustic cleaning agents.
e) Use road salt or loose chippings only conditionally.
f) Lay the floor mat without folds and flush with the floor.
g) Equipment required for cleaning purposes such as ladders or similar must not be leaned on or
attached to the system.
Tasks system operator
Task
Maintenance and cleaning
of the sensors for safety
and triggering
Function and safety check
Tasks of qualified person
The inspection is carried out according to the manufacturer's test instructions.
The inspection usually takes place at the same time as the maintenance of the system.
The inspection also checks whether no changes have been made to the system since the last inspec-
tion and whether it meets the current safety requirements.
Task
Acceptance test
Servicing
Test (inspection)
BAL_FF_TWIN_EN_3V0_REC_121-006454269
Personnel Time of implementation
System operator Weekly, or as required
System operator Monthly
Personnel Time of implementation
Qualified person After assembly of the door system
ready for operation
Qualified person 1 x annually, or according to country-
specific standards and guidelines
Qualified person 1 x annually, or according to country-
specific standards and guidelines
Inspection and maintenance
Entry in the inspec-
tion book
Entry in the inspec-
tion book
6
No
No
Yes
Yes
Yes
27 / 32