Table of Contents
Advertisement
I
MAGE DRUM REPLACEMENT
Static sensitive devices, handle with care.
The printer contains four image drums: cyan, magenta, yellow and black.
1.
Press the cover release and open the printer's top cover fully.
If the printer has been powered on, the fuser will be hot. This area
is clearly labelled. Do not touch.
2.
Note the positions of the four
that they go back in the same order.
3.
Holding it by its top centre, lift the image drum, complete with its toner cartridge, up
and out of the printer.
4.
Put the assembly down gently onto a piece of paper to prevent toner from marking
your furniture and to avoid damaging the green drum surface.
The green image drum surface at the base of the ID unit is very
delicate and light sensitive. Do not touch it and do not expose it to
normal room light for more than 5 minutes. If the drum unit needs
to be out of the printer for longer than this, please wrap the
cartridge inside a black plastic bag to keep it away from light.
Never expose the drum to direct sunlight or very bright room
lighting.
.
CAUTION!
WARNING!
toner
cartridges
b
CAUTION!
Replacing consumable items > 46
(a) and image drums (b). It is essential
a
Advertisement
Table of Contents
