Kenmore 263.1462 Series Use & Care Manual page 33

FAULT POSSIBLE CAUSE TROUBLESHOOTING
Whitish stains remains on Use the correct amount of detergent, as
Not enough detergent used.
dishes. instructed in the cycle table.
Drying option is not selected. Select a cycle with a drying option.
Dishes do not dry.
Rinse aid dosage set too low. Increase rinse aid dosage setting.
Stainless-steel quality of the dishes is
Use only dishwasher-proof sets.
insufficient.
Rust stains form on the
dishes.
Improper grounding of electrical supply. Consult a qualified electrician immediately.
Detergent was added when the Make sure detergent compartment is dry before
detergent compartment was wet. use.
Detergent remains in the
detergent compartment.
Items in the dishwasher may prevent the Make sure the items in the dishwasher do not
detergent compartment from opening. block the detergent compartment.
USA - CAN - 33