Panasonic ES ST6S Operating Instructions Manual page 22

Problem
Shaver does not
operate even after
charging.
The driving sound
changes while shaving.
Makes a loud sound.
22
ES-ST6S_2S_TW.indb 22
Action
Use the appliance in an
ambient temperature
approximately 5 °C or higher.
The battery has reached the
end of its life.
The shaver will not operate
with the AC adaptor
connected. Please use the
shaver after it has been
sufficiently charged and the
AC adaptor disconnected.
The shaving sensor is
operating. The sound
changes depending on the
beard thickness.
Apply oil.
The blades will not move
smoothly when there is no
oil on the blades, requiring
more power.
The shaver makes a high‑
pitched sound due to the
linear motor drive. This does
not indicate a problem.
Confirm that the blades are
properly attached.
Clean the system outer foil
with the brush.
Problem
This can be improved by
The odor is getting
cleaning every time after
stronger.
shaving.
When the shaver is very dirty,
The shaver cannot be first use the cleaning brush to
properly cleaned even remove beard trimmings.
after water is poured Or, remove the foil frame
from the water inlet. and wash with water.
(See page 17.)
This can be improved by
cleaning every time after
shaving.
Clean the inner blades with
Shavings fly out in all
the brush when shavings are
directions.
adhering to the inner blades.
Confirm that the cleaning
shutter is firmly closed.
Apply oil.
System outer foil gets
Replace the system outer
hot.
foil if it is damaged or
deformed.(See page 18.)
Action
2020/12/22 16:48:52