The pan supports can be removed to easily clean the hob (Fig.).
Wash the pan supports using hot soapy water; after cleaning, be sure to
wipe dry with a soft cloth.
The pan supports are not
dishwasher proof; they must be
washed by hand.
Washing them by hand, take care
when drying them as the enamelling
process occasionally leaves rough
edges. If necessay, remove stubborn
stains using a paste cleaner. After
cleaning, make sure that the pan
supports are correctly positioned.
Pay attention when replacing the pan supports in order to
avoid scratching the glass hob top.
The burner caps and crowns can be removed for cleaning.
Wash the burners caps and crowns using hot soapy water, and remove
marks with a mild paste cleaner. A well moistened soap impregnated
steel wool pad can be used with caution, if the marks are particularly
difficult to remove.
After cleaning, be sure to wipe dry with a soft cloth.
The Ignition electrode
The electric ignition is obtained through a ceramic electrode which
contains a metal electrode (Page 8 - lett. C). Keep these components very
clean, to avoid difficult lighting, and check that the burner crown holes
(Page 8 - lett. B) are not obstructed.
Periodically ask your local Service Centre to check the conditions of the
gas supply pipe and the pressure adjuster, if fitted.